DeSoto Carburetors for old Desoto's : DESOTO MODELS SF AIRSTREAM SG AIRFLOW 1935 Previous | Home | Next

De Soto "SF11 and "SG"-1935—No. BR—List Price $29.40
All Prices Subject to Prevailing Surcharge
WHEN SERVICING, USE GASKET ASSORTMENT No. 618—LIST PRICE $0.45; REPAIR PARTS PKG. No. I016A, PRICE $4.55
I-131S Body flange assembly (Sup. by I-180S) $3.70 61-85
1-180S Body flange assembly 3.70 63-25
IA-24 *Flange gasket (with governor) steelbestos— 86-10
11/2 inch S. A. E 09 86-I
IA-3I Flange gasket (without governor) steelbestos— 86-15
11/2 inch S. A. E 09 86-17
2-87 Throttle valve - --- _--°-- 30
3-2455 Throttle shaft and arm assembly 90
4-252S Throttle lever assembly 60
4A-48 Throttle shaft dog 30
6-1205 Air horn assembly 3 70
7-52S Choker valve assembly 75
118-16 Pump jet plug 15
IIB-27 Idle hole plug 15
IIB-40 Rivet plug (Sup. by IIB-79) 04
IIB-41 Rivet plug 04
IIB-55 Needle retainer plug 07
IIB-79 Rivet plug 04
14-1735 Choker lever and shaft assembly 60
14-183S Choker lever and screw assembly 30
17-30 Pump piston needle 20
20-3I Needle seat gasket 07
20-32 Metering screw gasket 07
20-37 Step-up piston washer 07
21-49S Float and lever assembly 1 20
24-19S Float lever pin and plug assembly 15
25-505 Needle and seat assembly .... 1 20
30A-37 Idle adjustment screw 45
38A-26 Step-up passage bushing 07
39-II Valve attaching screw for .07
48-44 Pump jet .0354" 20
49-89 Step-up push rod 15
49-99 Pump piston rod 04
61-58 Throttle lever adjusting screw spring 07
61-61 Step-up spring 07
61-84 Idle adjustment screw spring 07
Pump spring °---- I5
*Retainer ring 07
Lock washer (11/64 inch I. D.) 02
Lock washer (Use with 101-54) (2) 02
Flange stud lock washer 02
Lock washer (15/64 inch I. D.) (Use with
101-55) (4) .02
Choker lever clamp screw 07
Throttle lever clamp screw 07
Choker lever stop screw 07
Flange attaching screw (Sup. by 101-145$).42) .07 Air horn attaching screw (Sup. by
101-146S) (4) .07
Throttle adjusting screw 07
Flange attaching screw and washer assembly (2) .07 Air horn attaching screw and washer ass'y (4) .07
Flange stud nut_ 07
Choke connector rod 20
Ball _
Pump connector link 15
Pump operating link 20
Body gasket ...._ . I5
Body flange gasket - 07
Idle orifice tube and plug assembly 30
Main vent tube and plug assembly 30
Step-up valve assembly 60
Pin spring 02
Main metering screw—standard 45
Main metering screw—I size lean 45
Main metering screw—2 sizes lean .... 45
Pump piston --- 20
Pump piston, needle and plug assembly 45
Step-up piston assembly 45
Pump piston (outer) 60
Step-up jet (power orifice) _..._ 15
Insulator (Superseded by 183-17) 50
Insulator 50
*This gasket to be installed between carbureter and governor when governor is installed. Original flange gasket to remain between governor and manifold.
*Not used on first production carbureters. Early production units equipped with non-removable brass retainer washer for pump ball check.

Copyright 1935