DeSoto Carburetors for old Desoto's : DESOTO MODEL S8 1941 Previous | Home | Next

Part No. PART NAME Used On Price Part No.
1-363S Body flange assembly E6U1 $3.70 86-15
1-387S Body flange assembly E6U2 3.70 86-16
1A-24 *Flange gasket—with governor 09 86.40
1A-31 Flange gasket—without governor 09 101-12
2-87 Throttle valve 30 101-23
3-415S Throttle shaft and arm assembly E6151 .90
3.430S Throttle shaft and arm assembly E6U2 .90
4-402S Throttle lever assembly E6U1 .65
4-413S Throttle lever assembly E6U2 .65
4A-90 Fast idle cam-- 30
6-401S Air horn assembly E6U1 3.70
6-415S Air horn assembly E6U2 3.70
7-105S Choke valve assembly 75
11B-17 Pump check passage plug 15
11B-35 Rivet plug ..° ...------------°---- 04
11 B-41 Rivet plug 04
11B-79 Rivet plug ° ... .04
11B-103 Main vent tube rivet plug 04
11B-108 Idle port rivet plug_ 04
11B-138 Pump jet rivet plug 07
14-282 Choke lever (loose) 07
14-284S Choke lever and shaft assembly _ .65
20-26 *Main metering screw gasket 07
20-31 Needle seat gasket 07
20.51 *Step-up jet gasket 07
20-52 Step-up piston gasket (3) .07
20-81 Switch gasket 07
21-49S Float and lever assembly 1.20
24-23 Float lever pin 07
25-82S Needle and seat assembly 1.20
30A-37 Idle adjustment screw 45
39-11 Valve attaching screw (4) 2 for .07
48-75 Pump jet .- ------------....-.---.° .. .30
49-134S Valve plunger rod and plate assy.
(Sup. by 49-158S) E6U2
49-158S Plunger rod and plate assy. (Not sold
separately on E6U2—Part of unitized
package No. 149-98U)
61-58 Throttle lever adjusting screw spring 07
61-84 Idle adjustment screw spring 07 149.74U
61-134 Step-up piston spring 07
61-145 Pump spring 15 149.98U 61-150 Dash-pot plunger spring 15 150-111
61-157 Plunger spring (2) .15 150A-13
61-244 Dash-pot adjustment screw spring__E6U1 .07 156-29
61-251 Switch piston spring 15 159-63S
61-254 Plunger operating spring E6U2 .07 159-87S
63-24 Float lever pin retainer 07 159-89S
63-37 Pump retainer ring 07 160-46S
63-46 Spring retainer 07 160-74S
64-60S Pump plunger and rod assembly 161-45
(Identify by Shaft No. 49-120) 1.05 161-46
64-74S Dash-pot plunger and rod assembly 172-16
(Identify by Shaft No. 49-130) E6U1 1.30 183-30
64-77S Dash-pot plunger and rod assembly 184-26
(Identify by Shaft No. 49-132) E6U2 1.30 213-11S

*This gasket to be installed between carbureter and governor when governor is installed. Original flange gasket to remain between governor and manifold.
*Gaskets so marked must be soaked in 90 proof denatured alcohol for 15 minutes. installed on part and let dry before using. X 115-82U consists of 115-79S and 61-269, the entire step-down switch plunger assembly and spring.
NOTE—Small figures in parentheses preceding list price indicate number of pieces used on carbureter. Where no figure is shown, only one is used.
PART NAME Used On Price
Flange stud lock washer (2) .02
Switch plate lock washer (4) .02
Terminal connector lock washer 02
Throttle lever clamp screw 07
Switch plate attaching screw
(Sup. by 101-56) (4) 2 for .07
Switch plate attaching screw 2 for .07
Throttle adjusting screw 07
Terminal connector screw E6U2 .07
Dash-pot adjustment screw _E6U1 .15
Body flange attaching screw and
washer assembly : (2) .07
Air horn attaching screw and
washer assembly (4) .07
Terminal connector screw E6U1 2 for .07
Electro magnet assembly attaching
screw E6U2
Flange stud nut (2)
Choke connector rod.. ..
XPush rod assembly and sleeve spring unit
Pump cylinder ball
Pump check ball
Pump link
lifter
Dash-pot lifter link
Body flange gasket ....
-
Body gasket E6U1
Carbureter body to insulator gasket
Body gasket E6U2
Idle orifice tube and plug assembly
Throttle shaft spring washer
Switch washer
Main vent tube
Step-up jet and gasket assembly
Dash-pot valve assembly (Sup.
by 149-73S) ....-- E6U2
Dash-pot valve cage assembly
(Not sold separately on E6U2—Part
of unitized package No. 149-98U)
Dash-pot check valve and plunger
rod unit .. E6UI
Dash-pot valve cage assembly E6U2
Dash-pot pin
Pin spring .. °-- - ._ .
Gas line nipple E6U2R
_Main metering jet assembly—2 sizes lean
Main metering jet assembly—1 size lean.. Main metering jet assembly—standard...
Step-up piston, plate and rod assembly
Piston, contact, washer and screw asst'
Terminal end plate
Push rod end plate
Cable clip
Insulator - .... - --°
Switch terminal block
Electro magnet assembly : E6U2